Manual

PIcon II Programming
Rev 1.0 January 201435
When global settings have been configured (or if global settings are not available), press
<PUMP 1> to begin configuration of individual fueling positions. Using the <A/B> key,
toggle among the choices for each option Press <ENTER> to advance to the next option.
When the first position is configured, press <PUMP 2> to configure the next dispenser.
Continue until all dispensers are configured.
To exit Program Mode 60, press the <MANAGER> key. PGM 0m the mode entry prompt,
will appear on the display. To return to operator mode, press the <MANAGER> key again.