Manual

PIcon II Operation
Rev 1.0 January 201411
Special Select Functions
Listed below are the five special operator Select Functions, along with the key sequences
required to execute them. Each key sequence begins with the operator pressing the <SELECT>
key. The display will prompt you to enter a function key for the appropriate mode.
Press <MANAGER> key to exit.
Select Function Key Sequence
Time/Date
Press <SELECT> again
Press <MANAGER> to exit
Turn Console Off
Press <PUMP STOP>
Enter PIN Code
Press <ENTER> to turn back on
View Current Shift
Totals by Product
Press <ENTER>
Press <VOLUME> to see total volume
Press <CASH PAID> for cash total
Press <CREDIT PAID> for credit total
Press <ENTER> for next product
Press <MANAGER> to exit
Print Current Shift
Report
Press <PRINT>
Change Shift
Press <CHANGE> (only after viewing the
totals or after report printing is completed)
Note: The Change Shift function may be
utilized only after the totals have been viewed
or printed and may be accessed only once
every hour.
Table: Select Key Functions