Installation Manual

ManualsBrandsProgressive Dynamics ManualsAutomotiveInteli-Power 4600 Series Converter/Charger with Charge Wizard - 55 Amp

Installation and Operation Guide

PD4600 Series Converter Replacement

Member

Thank you for selecting Progressive Dynamics as your choice for your RV power needs! We’d like to welcome you

to a full line of industry - leading and time - tested products, including our newest addition to the PDI family, the

PD4600 Series Converter Replacement Unit.

The PD4600 Series Converter Replacement offers break-through technologies that help maintain and lengthen the

life of your batteries such as our patented Charge Wizard.

The built-in Charge Wizard



microprocessor constantly monitors the battery voltage and automatically adjusts the

converter output voltage to provide fast recharges and long-term maintenance.

The intelligent way to charge and maintain your RV battery!

Progressive Dynamics, Inc.

507 Industrial Rd.

Marshall, MI 49068

www.progressivedyn.com

Extended warranties

are available for purchase at

www.

progressivedyn

.com

Patent Numbers: 5,687,066 - 5,600,550 - 5,982,643 - 6,184,649 - 7,782,002.

Summary of content (8 pages)

PAGE 1
Installation and Operation Guide PD4600 Series Converter Replacement t ies se a m t n a ra rch .co r n wa r pu dy d de le fo ive n te lab ess x E ai gr v o e a .pr r a w ww Member Thank you for selecting Progressive Dynamics as your choice for your RV power needs! We’d like to welcome you to a full line of industry - leading and time - tested products, including our newest addition to the PDI family, the PD4600 Series Converter Replacement Unit.
PAGE 2
Table of Contents Installation Instructions 1-4 The Charge Wizard 5 Reverse Battery Protection 5 Technical Specs 5 LIMITED WARRANTY I. LIMITED WARRANTY: Progressive Dynamics, Inc. warrants its power control center to be free from defects in material or workmanship under normal use and service; and limits the remedies to repair or replacement. II.
PAGE 3
Page 1 INSTALLATION INSTRUCTIONS PD4600 SERIES CONVERTER REPLACEMENT KIT General This retrofit kit is intended to replace existing 35, 45, and 55 Amp AC to DC power converters (depending on model). Installation should be completed by a licensed electrician or certified RV Technician. Converter models this kit is intended to replace are as follows, and instructions for replacement of each model are contained in this manual.
PAGE 4
Page 2 Replacement instructions for Parallax/Magnetek Models: 6336, 6345, 6355, 7345, 7355 Removal: 1. 2. 3. 4. 5. 6. 7. 8. Disconnect all power sources as outlined on page (1) of this manual. Remove front panel by removing (4) screws at bottom of panel. Remove AC power section cover by removing (2) screws. Disconnect the neutral (white) converter feed wire from distribution block, and hot (black) wire from AC branch breaker. If the utility pigtail is used, remove wire nut.
PAGE 5
Page 3 Replacement instructions for Parallax/Magnetek Models: 7155 Removal: 1. 2. 3. 4. 5. 6. 7. 8. Disconnect all power sources as outlined on page (1) of this manual. Remove front panel by removing (6) screws at bottom of panel. Remove AC power section cover by removing (2) screws. Disconnect the neutral (white) converter feed wire from distribution block and hot (black) wire from AC branch breaker. If the utility pigtail is used, remove wire nut.
PAGE 6
Page 4 Replacement instructions for WFCO Models: 8935, 8945, 8955 Removal: 1. Disconnect all power sources as outlined on page (1) of this manual. 2. Remove front panel by opening access door and removing (2) screws. 3. Disconnect the neutral (white) and ground (green) converter feed wires from distribution blocks and hot wire from AC branch breaker. If the utility pigtail is used, remove wire nut. Pull wires thru the hole at the bottom left of the AC power section. 4.
PAGE 7
Page 5 Wizard Mode Button The Charge Wizard Operation: While the built-in Charge Wizard automatically determines which operating mode is best suited to recharge or maintain optimum battery condition, the Wizard Mode Button allows for manual override and has an indicator light to indicate the mode of operation. (Located on DC board, included) BOOST MODE – Indicated by green LED remaining on. The output voltage is 14.4VDC to rapidly recharge the battery up to 90% of full charge.
PAGE 8
P r o g r e s s i v e D y n a m i c s, I n c . 507 Industrial Rd Marshall, MI 49068 Visit us on the web for other great products. www.progressivedyn.