TY-05-30 / TY-05-40 / TY-05-50 User Manual Contents Caution/Liability Dimensions in Inches Specifications Electronics Hardware Assembly Instructions Page 2 Page 3 Page 3 Page 4 Page 5-7
Caution Make sure no obstacles are in the lift's path. Make sure the lift is not touching any walls. Make sure all cords are appropriate length to accommodate the change in height. Keep children away from electric TV lift, control units and remotes. There is a risk of injury and electric shock Keep all electrical components away from liquids. Do not sit or stand on the TV lift. Do not crawl or lie under the TV lift. Do not open any of the components - the linear actuator, control box or remote.
Dimensions in Inches 12.5 + Stroke Length + Stroke Length 35" for a 30" stroke 45" for a 40" stroke Specifications Model: TV Maximum Height: Wall Mount Measurements: Stroke Length: Weight: Speed at Full Load: Dynamic Load Input Voltage: Output Voltage: Overload Protection: Duty Cycle: Limit Switch: IP Grade: Operational Temperature: Certification: Control Options: TY-05-30 30" Stroke = 30" Tall 700mm x 500mm 30" 25.
Electronics Control Box Wireless Remote x1 Rocker Switch (Wire 35") External Limit Switch (Wire 60") x1 x1 x1 Hardware Ceiling Cover Brackets x2 Track Linear Actuator x1 Support Column x1 TV Mounting Brackets x4 Ceiling Cover x1 Actuator Mounting Bracket x1 TV Support Arms 30" x2 Purpose P1 Ceiling Cover Brackets P2 Ceiling Cover Brackets P3 TV Support Arm P4 TV Mounting Bracket P5 Support Column (middle) P5 Support Column (outside) P6 Actuator Mounting Bracket TV Support Arms 36" x2
Assembly Instructions Tools needed: philips screwdriver, 5mm allen key, 6mm allen key, 8mm allen key, 8mm socket, 13mm socket 1 2 3 Use the four M8x12 Phillips Countersunk Screws from bag P4 to mount the TV Mounting Brackets to the back of your television. Please be aware that the supplied screws may not fit your television. Ensure that you have the appropriate TV mounting screws before continuing. Tighten until secure.
Assembly Instructions 5 Use the Actuator Mount Bracket, Clevis Pin and Cotter Pin from bag P6 to mount the top portion of the Track Linear Actuator to your installation. The bottom portion comes with an attached bracket for installation. The wood screws shown in the diagram are not included. Tighten until secure. 6 For this step we recommend having at least two peope.
Assembly Instructions 9 Pairing the Wireless Remote Pairing the wireless remote is required before use. • Press and hold the UP and DOWN buttons on the wireless remote while simultaneously pressing the button on the side of the control box for 10 seconds. The TV lift will raise after the remote pairing has been completed. 10 Changing Travel Functionality To change the wireless remotes travel function from Momentary to Non-Momentary, hold the COM button for approximately 10 seconds.
