User manual
notification to keep the rinse aid refill
indicator active.
How to deactivate the rinse aid
empty notification
The appliance must be in programme
selection mode.
1. To enter the user mode, press and
hold simultaneously and until
the indicators , and start
to flash.
2. Press
.
• The indicators and a go
off.
• The indicator continues to flash.
• The end indicator indicates the
current setting: The indicator
on = rinse aid empty notification
activated.
3. Press to change the setting. The
indicator off = rinse aid empty
notification deactivated.
4. Press the on/off button to confirm the
setting.
Acoustic signals
Acoustic signals sound when a
malfunction of the appliance occurs. It is
not possible to deactivate these acoustic
signals.
There is also an acoustic signal that
sounds when the programme is
completed. By default this acoustic signal
is deactivated but it is possible to activate
it.
How to activate the acoustic
signal for the end of programme
The appliance must be in programme
selection mode.
1. To enter the user mode press and hold
simultaneously
and until the
indicators , and start to
flash.
2. Press .
• The indicators
and go off.
• The indicator continues to
flash.
• The indicator is off.
3. Press to change the setting.
• The indicator comes on. The
acoustic signal for the end of
programme is activated.
4. Press the on/off button to confirm the
setting.
OPTIONS
Desired options must be
activated every time before you
start a programme.
It is not possible to activate or
deactivate options while a
programme is running.
Not all options are compatible
with each other. If you have
selected non compatible
options, the appliance will
automatically deactivate one or
more of them. Only the
indicators of the options still
active will stay on.
XtraDry
Activate this option when you want to
boost the drying performance. With the
use of this option, the duration of some
programmes, water consumption and the
last rinse temperature can be affected.
The option XtraDry is not a permanent
option and must be selected at every
cycle.
How to activate XtraDry
Press and hold simultaneously and
until the indicator comes on.
48 Progress