User manual
Table Of Contents
- INHOUDSOPGAVE
- VEILIGHEIDSINFORMATIE
- VEILIGHEIDSVOORSCHRIFTEN
- MONTAGE
- BEDIENING
- DAGELIJKS GEBRUIK
- AANWIJZINGEN EN TIPS
- ONDERHOUD EN REINIGING
- PROBLEEMOPLOSSING
- TECHNISCHE GEGEVENS
- CONTENTS
- SAFETY INFORMATION
- SAFETY INSTRUCTIONS
- INSTALLATION
- OPERATION
- DAILY USE
- HINTS AND TIPS
- CARE AND CLEANING
- TROUBLESHOOTING
- TECHNICAL DATA
- TABLE DES MATIÈRES
- INFORMATIONS DE SÉCURITÉ
- CONSIGNES DE SÉCURITÉ
- INSTALLATION
- FONCTIONNEMENT
- UTILISATION QUOTIDIENNE
- CONSEILS
- ENTRETIEN ET NETTOYAGE
- DÉPANNAGE
- CARACTÉRISTIQUES TECHNIQUES
- INHALTSVERZEICHNIS
- SICHERHEITSHINWEISE
- SICHERHEITSANWEISUNGEN
- MONTAGE
- BETRIEB
- TÄGLICHER GEBRAUCH
- TIPPS UND HINWEISE
- REINIGUNG UND PFLEGE
- FEHLERSUCHE
- TECHNISCHE DATEN

Do not move the glass shelf
above the vegetable drawer to
ensure correct air circulation.
Frozen Food Calendar
The symbols show different types of
frozen goods.
The numbers indicate storage times in
months for the appropriate types of frozen
goods. Whether the upper or lower value
of the indicated storage time is valid
depends on the quality of the foods and
treating before freezing.
Ice-cube production
This appliance is equipped with one or
more trays for the production of ice-cubes.
Do not use metallic instruments
to remove the trays from the
freezer.
1. Fill these trays with water
2. Put the ice trays in the freezer
compartment.
Temperature indicator
For proper storage of food the refrigerator
is equipped with the temperature indicator.
The symbol on the side wall of the
appliance indicates the coldest area in the
refrigerator.
If OK is displayed (A), put fresh food into
area indicated by symbol, if not (B), adjust
the temperature controller to a colder
setting and wait 12 hours before checking
the temperature indicator again.
OK
OK
A
B
After putting fresh food into the
appliance or after opening the
door repeatedly or for a long
period, it is normal for the
indicator not to show OK. Wait
at least 12 hours before
readjusting the temperature
controller.
HINTS AND TIPS
Normal operating sounds
The following sounds are normal during
operation:
• A faint gurgling and bubbling sound
from coils sound when refrigerant is
pumped.
• A whirring and pulsating sound from
the compressor when refrigerant is
pumped.
• A sudden cracking noise from inside
appliance caused by thermic dilatation
(a natural and not dangerous physical
phenomenon).
• A faint click noise from the temperature
regulator when the compressor
switches on or off.
Hints for energy saving
• Do not open the door frequently or
leave it open longer than absolutely
necessary.
Progress 23