User manual

min.
200 cm
2
min.
200 cm
2
Installing the appliance
Caution! Make sure that the mains
cable can move freely.
Do the following steps:
1. Install the sealing strip.
a) Remove the strip cover.
b) Apply the adhesive sealing strip to
the appliance as shown in figure.
2. Install the appliance in the niche.
a) Push the appliance in the direction of
the arrows (1) until the upper gap
cover stops against the kitchen fur-
niture.
b) Push the appliance in the direction of
the arrows (2) against the cupboard
on the opposite side of the hinge.
1
2
3. Adjust the appliance in the niche. Align
the lower hinge with the kitchen furniture.
4. Attach the appliance to the niche with 4
screws.
I
5. Attach the covers (C, D) to the lugs and
the hinge holes.
Install the vent grille (B).
Attach the hinge cover (E) to the hinge.
22 progress