User manual
1. Install the sealing strip.
a) Remove the strip cover.
b) Apply the adhesive sealing strip to
the appliance as shown in figure.
2. Install the appliance in the niche.
a) Push the appliance in the direction
of the arrows (1) until the upper gap
cover stops against the kitchen fur-
niture.
b) Push the appliance in the direction
of the arrows (2) against the cup-
board on the opposite side of the
hinge.
1
2
3. Adjust the appliance in the niche. Align
the lower hinge with the kitchen furni-
ture.
4. Attach the appliance to the niche with 4
screws.
I
progress 27