User manual

Before first use
Warning! Remove all packaging,
both inside and outside the oven,
before using the oven.
Before the first use, the oven should be heat-
ed while empty.
During this time, an unpleasant odour may be
emitted. This is absolutely normal. It is
caused by manufacturing residues.
The oven will only function when the
clock has been set to the time of
day.
Ensure that the kitchen is well ventilated.
1. Store the clock time in the electronic pro-
gramme memory (see the chapter enti-
tled “Electronic timer”)
2.
Turn the oven regulator to hot air
3. Turn the temperature regulator to 250°C.
4. Open a window for ventilation.
5. Allow the oven to run empty for approxi-
mately 45 minutes.
Repeat the procedure for top and bottom
oven element
and thermal grill for
about 5-10 minutes.
Once this operation is carried out, let the
oven cool down, then clean the oven cavity
with a soft cloth soaked in warm soapy wa-
ter.
Before cooking for the first time, carefully
wash the oven accessories as well.
To open the oven door, always hold the han-
dle in the centre, until it is fully open.
Operation
56 4
1
8
7
2
3
1 Display
2
“Minute minder” pilot lamp
3
“Clock” pilot lamp
4
Button “
”
5
Function selector button
6
Button “
”
7
“End of cooking time” pilot lamp
8
“Cooking time” pilot lamp
The oven will only work when the
clock has been set. However, the oven
can also be operated without any pro-
gramme having been selected.
In the event of a power failure, all settings
(clock time, programme setting or pro-
gramme in operation) will be cancelled.
When the power supply is restored
again, the numbers in the display flash.
If this happens, the clock and timer must
be re-set.
Setting the clock
When the power is switched on or if a power
failure occurs, the “Clock”
pilot lamp will
flash in the display.
To set the clock:
1.
Press the button “
” or “ ”.
30 progress