User manual

For time change you must not set an
automatic function (Duration
or End
) at the same time.
Pre-heating
1.
Set function
and maximum tempera-
ture.
2. Let the appliance operate without the
food for approximately 1 hour.
3.
Set function
and maximum tempera-
ture.
4. Let the appliance operate without the
food for approximately 10 minutes.
5.
Set function
and maximum tempera-
ture.
6. Let the appliance operate without the
food for approximately 10 minutes.
This is to burn off the residue in the appli-
ance. The accessories can become more
hot than usually. When you pre-heat the
appliance for the first time, the appliance
can make an odour and smoke. This is the
usual effect. Make sure the airflow is suffi-
cient.
Warning! Refer to "Safety information"
chapter.
To use the appliance, push the control
knob. The control knob comes out.
Activating and deactivating the
appliance
1. Turn the knob for the oven functions to
an oven function.
2. Turn the knob for the temperature to a
temperature.
The power indicator comes on while the
appliance operates.
The temperature indicator comes on
while the temperature in the appliance
increases.
3. To deactivate the appliance, turn the
knob for the oven functions and the
knob for the temperature to the Off po-
sition.
Cooking zones
With the control knobs for cooking
zones you operate the hob that you in-
stalled with the oven. For more infor-
mation about the hob, refer to the hob
user manual.
Heat settings
Control knob Function
0 Off position
1-9
Heat settings
(1 = lowest heat setting; 9=
highest heat setting)
1. Turn the control knob to a necessary
heat setting.
2. To complete the cooking process, turn
the control knob to the “0” position.
Use of the double zone (if applicable)
Warning! To set double zone on turn
the control knob with the double zone
to the right (do not turn it through the
stop position).
1. Turn the control knob to the right - to
position "9".
2. Turn the control knob slowly to symbol
until you can hear a click.
At this time the two cooking zones are
on.
3. To set necessary heat setting refer to
"Heat settings".
Oven Functions
Oven function Application
OFF position The appliance is OFF.
Fan forced cooking
To cook several different dishes at the same time. To cook home-
made fruit in syrup, and to dry mushrooms or fruit.
Conventional cook-
ing
Heats both from the top and bottom element. To bake and roast on
one oven level.
progress 23