User manual

36 progress
Dual-circuit switching
(see list of appliances in the “Technical data”
section)
The two heating circuits are switched on
by turning the cooking zone knob from posi-
tion 9 to position
(clockwise); an audible
click is heard. Both heating circuits are now
switched on simultaneously. Then set the re-
quired level (turn the knob anti-clockwise).
Never leave the appliance unsu-
pervised when preparing food
with oil or fat, like chips, for ex-
ample, as oil and fat can easily
catch fire if overheated.
Safety thermostat
To prevent dangerous overheating
(through incorrect use of the appliance or
defective components), the oven is fitted with
a safety thermostat, which interrupts the
power supply. The oven switches back on
again automatically when the temperature
drops.
Should the safety thermostat trigger due
to incorrect use of the appliance, simply rem-
edy the error after the oven has cooled down.
However, if the thermostat has been trig-
gered by a faulty component, please contact
customer services.
Cooling fan
The fan cools the oven and control panel.
The fan switches on automatically after a few
minutes of cooking. Hot air is extracted
through the vents near the oven door handle.
When the oven has been switched off, the
fan may continue to run to cool the operating
elements. This is absolutely normal.
The action of the cooling fan will de-
pend on how long the oven has been
used and at what temperature. It may
not cut in at all at lower temperature
settings or continue to run if the oven
has only been used for a short time.