User manual

19 progress
)
Changing the interior light bulb
Separate the appliance from the
power supply by switching off
the fuse.
If the oven light needs replacing, the new
bulb must have the following specifications:
- Electric power: 15 W / 25 W
- Electric voltage: 230 V (50 Hz)
- Heat resistance to 300 °C
- Type of connection: E14
These replacement bulbs can be
purchased from your dealer.
To change the oven light:
1. First ensure that the oven has cooled
down and has been disconnected from
the mains.
2. Turn the glass cover of the light counter-
clockwise.
3. Remove the used bulb and insert a new
one.
4. Replace the glass cover and reconnect the
oven to the mains.
1
2
3
Oven shelf support rails
The shelf support rails on the left and right
hand sides of the oven can be removed for
cleaning the side walls.
Removing the shelf support rails
First pull the front of the rail away from the
oven wall and then unhitch at the back (1, 2).
Fitting the shelf support rails
To install, first reattach the rails at the back,
then put them into position at the front and
press them into place (3).
To clean the shelf support rails, soak in warm
soapy water and remove stubborn marks with
a well wetted soap impregnated pad. Rinse
well and dry with a soft cloth.