User manual

Warning! Deactivate the appliance
before you remove the heating
element. Make sure that the appliance
is cold. There is a risk of burns!
1. Remove the screw which holds the
heating element. At first time, use a
screwdriver.
2. Carefully pull the heating element down.
At this time you can clean the oven ceil-
ing.
Clean the oven ceiling with a soft cloth with
warm water and cleaning agent and let it
dry.
Installing the heating element
1. Install the heating element in opposite
sequence.
Make sure that the heating element is cor-
rectly installed and it does not fall down.
Shelf Support Rails
Removing the shelf support rails
1. Pull the front of the shelf support rail
away from the side wall.
2. Pull the rear shelf support rail away from
the side wall and remove it.
Installing the shelf support rails
Install the shelf support rails in opposite se-
quence.
The rounded ends of the shelf support
rails must point to the front!
Cleaning the oven door
The oven door has two panels of glass. You
can remove the oven door and the internal
panel of glass to clean it.
The oven door can close if you try to
remove the internal panel of glass be-
fore you remove the oven door.
28 progress