user manual Ceramic glass hob PES6060E
progress Contents Safety Information Description of the Appliance Operating the hob Tips on Cooking and Frying Cleaning and Care 2 3 3 3 4 What to do if ... Disposal Installation Instructions Service 5 5 5 7 Subject to change without notice Safety Information Warning! Please comply with these instructions. If you do not, any damage resulting is not covered by the warranty.
progress 3 • Do not use the cooking zones with empty cookware or without cookware. • To avoid damaging cookware and glass ceramics, do not allow saucepans or frying pans to boil dry. Description of the Appliance 2 1 m 5m 265/170 mm 14 20 mm 1. 2. 3. 4. 5.
progress Always place cookware on the cooking zone before it is switched on. Energy saving If possible, always place lids on the pans. Switch cooking zones off before the end of the cooking time, to take advantage of residual heat. Bottom of pans and cooking zones should be the same size. Cleaning and Care Warning! Risk of burns from residual heat. Warning! Sharp objects and abrasive cleaning materials will damage the appliance. Clean with water and washing up liquid.
progress 5 * Scrapers and cleaners for glass ceramic and stainless steel can be purchased in specialist shops Remove stubborn residues with a cleaner for glass ceramic or stainless steel. Scratches or dark stains on the glass ceramic that cannot be removed do not however affect the functioning of the appliance. What to do if ... Problem The cooking zones are not functioning. Possible cause The desired heat setting is not set. Remedy Set the heat setting.
progress Warning! Risk of injury from electrical current. • The electrical mains terminal is live. • Make electrical mains terminal free of voltage. • Follow connection schematic. • Observe electrical safety rules. • Ensure anti-shock protection by installing correctly. • The appliance must be connected to the electrical supply by a qualified electrician. Warning! Risk of injury from electrical current. • Loose and inappropriate plug and socket connections can make the terminal overheat.
progress 7 PES 6060 E 55AAD65ZO 949 592 997 230 V 50 Hz 7,6 kW PROGRESS Service In the event of technical faults, please first check whether you can remedy the problem yourself with the help of the operating instructions (section “What to do if…”). If you were not able to remedy the problem yourself, please contact the Customer Care Department or one of our service partners.
progress – Model description – Product number (PNC) – Serial number (S No.
progress 9
progress
progress 11
www.progress-hausgeraete.
