User manual

1. To turn on the function turn on the
oven.
2. Turn on an oven function or setting.
3. Touch and hold and at the
same time for 2 seconds.
A signal sounds.
Lock comes on in the display.
To turn off the Function Lock repeat step
3.
You can turn off the oven when
the Function Lock is on. When
you turn off the oven, the
Function Lock turns off.
Using the settings menu
The settings menu lets you turn on or turn
off functions in the main menu. The
display shows SET and the number of the
setting.
Description Value to set
1 RESIDUAL HEAT INDICATOR ON / OFF
2
KEY TONE
1)
CLICK / BEEP / OFF
3 FAULTY TONE ON / OFF
4 DEMO MODE Activation code: 2468
5 BRIGHTNESS LOW / MEDIUM / HIGH
6 WATER HARDNESS 1 - 4
7 CLEANING REMINDER ON / OFF
8 SERVICE MENU -
9 RESTORE SETTINGS YES / NO
1)
It is not possible to deactivate the tone of the ON / OFF sensor field.
1. Press and hold for 3 seconds.
The display shows SET1 and "1" flashes.
2. Press or to set the setting.
3. Press .
4. Press or to change the value of
the setting.
5. Press .
To exit the Settings menu, press
or
press and hold .
Automatic Switch-off
For safety reasons the appliance
deactivates automatically after some time
if an oven function operates and you do
not change any settings.
Temperature (°C) Switch-off time (h)
30 - 115 12.5
120 - 195 8.5
200 - 230 5.5
After the Automatic switch-off, touch a
sensor field to operate the appliance
again.
The Automatic switch-off does
not work with the functions:
core temperature sensor, Light,
Duration, End, Time delay.
20 Progress