User manual

2. Place half of the ingredients in a
baking dish.
3. Insert the tip of the core temperature
sensor exactly in the centre of the
casserole. The core temperature
sensor should be stabilized in one
place during baking. Use a solid
ingredient to achieve that. Use the rim
of the baking dish to support the
silicone handle of the core temperature
sensor. The tip of the core temperature
sensor should not touch the bottom of
a baking dish.
4. Cover the core temperature sensor
with the remaining ingredients.
5. Put the plug of the core temperature
sensor into the socket located in the
front frame of the appliance.
The display shows flashing and the
default set core temperature. The
temperature is 60 °C for the first
operation, and the last set value for each
subsequent operation.
6. Touch or to set the core
temperature.
7. Touch or the settings save
automatically after 5 seconds.
You can set the core
temperature only when
flashes. If is in the
display but does not flash
before you set the core
temperature, touch and
or to set a new
value.
8. Set the oven function and the oven
temperature.
The display shows the current core
temperature and the heat up symbol .
When the dish is at the set core
temperature, an acoustic signal sounds for
2 minutes and the value of the core
temperature and
flash. The appliance
deactivates.
9. Touch a sensor field to deactivate the
acoustic signal.
10. Remove the core temperature sensor
from the socket and remove the dish
from the appliance.
WARNING! There is a risk of
burns as the core temperature
sensor becomes hot. Be
careful when you unplug it and
remove it from the dish.
Inserting the accessories
Wire shelf:
Push the shelf between the guide bars of
the shelf support and make sure that the
feet point down.
18 Progress