User manual

When the water hardness exceeds the
values in the table, fill the water drawer
with bottled water.
1. Take the 4 colour change strip
supplied with the steam set in the
oven.
2. Put all the reaction zones of the strip
into the water for approximately 1
second.
Do not put the strip into the running
water.
3. Shake the strip to remove the excess
of the water.
4. Wait 1 minute and check the water
hardness with the table below.
The colours of the reaction zones
continue to change. Do not check the
water hardness later than 1 minute
after test.
5. Set the water hardness: settings
menu.
Refer to the "Additional functions" chapter,
Using the settings menu.
Test strip Water Hardness
1
2
3
4
You can change the water hardness in the
settings menu.
DAILY USE
WARNING! Refer to Safety
chapters.
Heating functions
Oven func‐
tion
Application
True Fan
Cooking
To bake on up to two
shelf positions at the
same time and to dry
food.
Set the temperature 20 -
40 °C lower than for Con‐
ventional Cooking.
Pizza Setting
To bake pizza. To make
intensive browning and a
crispy bottom.
Slow Cooking
To prepare tender, suc‐
culent roasts.
Oven func‐
tion
Application
Conventional
Cooking
(Top / Bottom
Heat)
To bake and roast food
on one shelf position.
Frozen Foods
To make convenience
food (e.g. french fries,
potato wedges or spring
rolls) crispy.
Grilling
To grill flat food and to
toast bread.
Turbo Grilling
To roast larger meat
joints or poultry with
bones on one shelf posi‐
tion. To make gratins and
to brown.
Bottom Heat
To bake cakes with
crispy bottom and to pre‐
serve food.
10 Progress