User manual

Clock function Application
Minute minder To set a countdown time.
A signal sounds, after the time period is completed.
This function has no effect on the operation of the oven.
Duration To set how long the oven has to be in operation.
End To set the switch-off time for an oven function.
Duration and End can be used at
the same time, if the oven is to be
switched on and off automatically later.
In this case first set Duration
, then
End
.
Setting the clock functions
12
1. Set an oven function and a temperature
(not necessary for the Minute Minder).
Refer to "Setting the oven function".
2.
Push
again and again until the sym-
bol for the necessary clock function
flashes.
3.
To set the time for Minute minder
,
Duration
or End , push or
button.
The related clock function symbol
comes on.
When the time period is completed, the
clock function symbol flashes and an
acoustic signal sounds for 2 minutes.
Push any button to stop the signal.
With the functions Duration and End
the appliance stops automatically.
4. Deactivate the appliance.
Cancelling the clock functions
1.
Push
again and again until necessa-
ry function indicator and
flashes.
2.
Push "
" again and again until the
time is "00:00".
USING THE ACCESSORIES
Warning! Refer to "Safety information"
chapter.
Turnspit
31 2 4
1 Handle
2 Spit
3 Forks
4 Turnspit frame
Warning! The forks and the spit of the
turnspit are sharp (if supplied). Be
careful when you operate it.
1. Install the deep roasting pan in the first
shelf position from the bottom.
2. Install the turnspit frame on the second
shelf position from the bottom.
3. Install the first fork in the spit.
4. Put the food to be grilled.
5. Install the second fork.
Use the screws to tighten the forks.
6. Install the point of the spit in the turnspit
hole (refer to "Product description").
7. Install the front part of the spit on the
spit frame.
8. Remove the handle.
9. Set the oven function and a temperature
(refer to "Cooking tables").
28 progress