User manual

Before first use
Warning! Remove all packaging,
both inside and outside the oven,
before using the oven.
When the oven is first connected to the elec-
trical supply, the display will automatically
show 12:00 and the symbol
flashes.
Ensure the correct time of day is set before
using the oven.
Setting the clock:
1.
Press the button
and, while the sym-
bol
is flashing, set the correct time of
day by pressing buttons “
” or “ ”
The time arrow symbol
will disappear
about 5 seconds after the correct time is
displayed.
1
2
2.
As soon as the symbol
stops flashing,
press button
twice.
Then, proceed as described in point 1.
Before the first use, the oven should be heat-
ed while empty.
1.
Press the button
to switch on the
oven.
2.
Press the button
twice and select the
«Hot air» function
12
3. Set the temperature to 250°C by using
the button “
”.
4.
Allow the oven to run empty for approx-
imately 45 minutes.
5. Open a window for ventilation.
This procedure should be repeated with the
function «Top and bottom heating element»
and «Thermal grill» for about 5-10 minutes.
During this time, an unpleasant odour may be
emitted. This is absolutely normal. It is
caused by manufacturing residues.
Once this operation is carried out, let the
oven cool down, then clean the oven cavity
with a soft cloth soaked in warm soapy wa-
ter.
Before cooking for the first time, carefully
wash the oven accessories as well.
To open the oven door, always hold the han-
dle in the centre, until it is fully open.
“On / Off” - button
The oven must be switched on before setting
any cooking functions or programmes. After
the button
is pressed, the oven symbol
will appear in the display, and the oven light
will switch on
progress 33