User manual

Settings menu
The settings menu lets you to add or re-
move functions from the main menu (for ex-
ample: you can set on or off the Residual
heat indicator). Settings menu has maxi-
mum eight settings (from SET1 to SET8).
The number of the settings is different for
different models. Look into the table below
to see the possible value of each setting.
Settings menu
Indicator of the setting
menu
Description Value to set
SET1 SET+GO ON / OFF
SET2 RESIDUAL HEAT INDICATOR ON / OFF
SET3 CLEANING REMINDER ON / OFF
SET4
1)
KEY TONE CLICK / BEEP / OFF
SET5 FAULTY TONE ON / OFF
SET6 SERVICE MENU ---
SET7 RESTORE SETTINGS YES / NO
SET8
2)
TIME EXTENSION ON / OFF
1) It is not possible to deactivate the tone of the ON / OFF sensor field.
2) Selected models only
You can set the settings menu only
when the appliance is off.
Activate the Settings menu:
1.
If necessary, deactivate the appliance
.
2.
Touch and hold
for three seconds.
The display shows "SET1" and "1"
flashes.
3.
Touch
/ to set the setting.
4.
Touch
.
5.
Touch
/ to change the value of
the setting.
6.
Touch
.
Automatic switch-off
For safety reasons the appliance deacti-
vates automatically after some time:
• if an oven function operates.
• if you do not change the oven tempera-
ture.
Temperature Switch-off time
30 °C - 115 °C 12.5 h
120 °C - 195 °C 8.5 h
200 °C - 245 °C 5.5 h
250 °C - maximum °C 3.0 h
After the Automatic switch-off, touch a sen-
sor field to operate the appliance again.
Important! The Automatic switch-off works
with all oven functions, apart from Slow
Cook, Duration, End, Time delay.
Brightness of the display
There are two modes of display
brightness:
• Night brightness - when the appliance is
deactivated, the brightness of the display
is lower between 10 PM and 6 AM.
•Day brightness:
– When the appliance is activated.
– If you touch a sensor field during the
night brightness (apart from ON / OFF),
the display goes back to the day
brightness mode for the next 10 sec-
onds.
– If the appliance is deactivated and you
set the Minute Minder. When the Mi-
nute Minder function ends, the display
goes back to the night brightness.
Cooling fan
When the appliance operates, the cooling
fan activates automatically to keep the sur-
faces of the appliance cool. If you deacti-
vate the appliance, the cooling fan can con-
14 progress