User manual

How to use the pyrolytic cleaning
function
Warning! Before activating the
pyrolytic cleaning function, remove
any excessive spillage and make
sure that the oven is empty. Do not
leave anything inside it (e.g. pans,
grids, baking tray, drip pan, etc.) as
they could become severely
damaged.
Warning! Ensure that the oven door
is closed before activating the
pyrolytic cleaning function.
Warning! When the pyrolytic
cleaning function is on, it is
advisable not to use the hob as this
could cause overheating and
damage the appliance.
Warning! During the pyrolytic
cleaning cycle the oven door
becomes very hot. Children should
be kept away until it has cooled.
Choose this function to clean the oven by
pyrolysis.
The following pyro levels are available:
Pyrolytic 1 (P I), Time: 2 hours. = 30 mins
Heating-up +1 hour. at 480 °C + 30 mins
Cooling down time.
Pyrolytic 2 (P 2), Time: 2 hours. 30 mins. =
30 mins Heating-up +1 hour. 30 mins. at 480
°C + 30 mins Cooling down time.
The pyro duration time cannot be changed.
Before performing the pyrolysis, all side
rails must have been removed.
Oven shelf runner
The shelf support rails on the left and right
hand sides of the oven can be removed for
cleaning the side walls.
First ensure that the oven has cooled down
and has been disconnected from the mains.
Removing the shelf support rails .
First pull the front of the rail away from the
oven wall and then unhitch at the back.
Fitting the shelf support rails
To install, first reattach the rails at the back,
then put them into position at the front and
press them into place.To clean the shelf sup-
port rails, soak in warm soapy water and re-
move stubborn marks with a well wetted
soap impregnated pad. Rinse well and dry
with a soft cloth.
To activate the pyrolytic cleaning
function proceed as follows:
1.
Using the button
switch on the oven.
Press the button
as often as neces-
sary, until the Pyro function symbol
(level 1 - P I) appears in the display
progress 45