User manual

1
2
2.
As soon as the symbol
stops flashing,
press button
twice.
Then, proceed as described in point 1.
Before the first use, the oven should be heat-
ed while empty.
1.
Press the button
to switch on the
oven.
2.
Press the button
twice and select the
«Hot air» function
12
3. Set the temperature to 250°C by using
the button “
”.
4. Allow the oven to run empty for approx-
imately 45 minutes.
5. Open a window for ventilation.
This procedure should be repeated with the
function «Top and bottom heating element»
and «Thermal grill» for about 5-10 minutes.
During this time, an unpleasant odour may be
emitted. This is absolutely normal. It is
caused by manufacturing residues.
Once this operation is carried out, let the
oven cool down, then clean the oven cavity
with a soft cloth soaked in warm soapy wa-
ter.
Before cooking for the first time, carefully
wash the oven accessories as well.
To open the oven door, always hold the han-
dle in the centre, until it is fully open.
“On / Off” - button
The oven must be switched on before setting
any cooking functions or programmes. After
the button
is pressed, the oven symbol
will appear in the display, and the oven light
will switch on
To switch off the oven, you can press button
. This is possible at any time. Any cooking
function or programme will stop, the oven
light will switch off and the time display will
show the time of day only.
It is possible to switch off the oven at any
time.
How to select a cooking function
1. Switch on the oven by pressing the but-
ton
.
2.
Press the button
to select the required
oven function. Each time button
is
pressed, a cooking symbol will come on
in the display and the corresponding
cooking function number will appear to
the left of the currently selected cooking
function symbol
32 progress