Operation Manual

CLOCK FUNCTIONS
Clock function Application
Time of day To set, change or check the time of day.
Minute Minder To set a countdown time. This function has no effect on the opera-
tion of the oven.
Duration To set how long the appliance must operate.
End To set when the appliance must be deactivated.
You can use Duration and End
at the same time to set the time when
the appliance must be activated and
then deactivated. First set Duration
,
then End
.
Setting the clock functions
12
1.
For Duration
and End , set an
oven function and temperature. This is
not necessary for the Minute Minder
. Refer to "Setting an oven function".
2.
Press
again and again until the sym-
bol for the necessary clock function
flashes.
3. Press + or - to set the necessary clock
function.
The display shows the symbol for the
clock function you set. When the set
time ends, the symbol flashes and an
acoustic signal sounds for two minutes.
With the Duration and End func-
tions, the appliance deactivates auto-
matically.
4. Press a button to stop the signal.
5. Deactivate the appliance.
Cancelling the clock functions
1.
Press
again and again until the sym-
bol for the necessary clock function
and
flash in the display.
2. Press and hold the button - until the
clock function goes out.
USING THE ACCESSORIES
Warning! Refer to "Safety information"
chapter.
Turnspit
A B
D
C
A) Turnspit frame
B) Forks
C) Spit
D) Handle
Warning! Be careful when you use the
turnspit. The forks and the spit are
sharp. There is a risk of injury.
Warning! Use oven gloves when you
remove the turnspit. The turnspit and
the grill are hot. There is a risk of burns.
progress 29