Operation Manual

6. Let the appliance operate without the
food for approximately 10 minutes.
This is to burn off the residue in the appli-
ance. The accessories can become more
hot than usually. When you pre-heat the
appliance for the first time, the appliance
can make an odour and smoke. This is the
usual effect. Make sure the airflow is suffi-
cient.
DAILY USE
Warning! Refer to "Safety information"
chapter.
The display
1 2 3
1 Cooking function
2 Temperature
3 Time
Button Function Description
ON/OFF To switch the appliance on or off.
SELECTOR To set the oven function.
RAPID HEAT UP To switch the rapid heat-up function on.
PYROLYTIC CLEANING To start the Pyrolytic cleaning.
/
PLUS, MINUS To adjust the values (temperature and time).
CLOCK To set the clock function.
Setting the oven function
12
1.
Push
again and again until the sym-
bol for the necessary oven function
flashes.
The display shows an automatic tem-
perature. If you do not change the tem-
perature in approximately 5 seconds,
the appliance starts to operate.
2.
To change the temperature, push
or
button.
If you start an oven function, the sym-
bol of the temperature
flashes.
The symbol shows that the tempera-
ture in the appliance increases.
When the appliance is at the set tem-
perature, an acoustic signal sounds
and the symbol of the temperature
stops to flash.
If there is a power cut, the programmer
keeps all the settings for approximately
3 minutes. After more than 3 minutes
without power supply, you have to do
the settings (also the time of day)
again.
Oven functions
Oven Function Application
Fan forced cooking
To roast or roast and bake the food that requires
the same cooking temperature, using more than
one shelf, without flavour transference.
progress 25