Operation Manual

78 progress
Installation instructions
For ensuring a trouble free use of the in-
stalled appliance, the unit or the column
where the appliance is to be installed should
have appropriate dimensions.
In accordance with the regulations in
force, all parts which ensure the shock pro-
tection of live and insulated parts must be
fastened in such a way that they cannot be
undone without tools.
These also include the fixing of any end
walls at the beginning or end of a line of built-
in units.
The shock protection must in any case
be ensured by the building in of the appli-
ance.
The appliance can be placed with its
back or a side wall against higher kitchen
units, appliances or walls. However, only
other appliances or units of the same height
as the appliance can be placed against the
other side wall.
Oven dimensions (see figure)
Instructions for building in
For ensuring a trouble free use of the in-
stalled appliance, the unit or the column
where the appliance is to be installed should
have appropriate dimensions.
550 M
IN
600
560 - 570
80÷100