Operation Manual

74 progress
)
Replacing the oven light
Separate the appliance from the
power supply by switching off
the fuse.
If the oven bulb needs replacing, the
new bulb must have the following specifica-
tions:
- Electric power: 40 W
- Electrical rating: 230 V (50 Hz)
- Heat resistance up to 300 °C
- Connection type: E14
These replacement bulbs can be pur-
chased from your dealer.
To change the oven light:
1. Before proceeding ensure the oven is
cool and is disconnected from the elec-
tricity supply.
2. Push in and turn the glass cover
anticlockwise
3. Remove the faulty bulb and replace with
the new one.
4. Refit the glass cover and restore the
electrical supply.
Cleaning the oven door seals
A seal is fitted around the opening of the
oven.
Check the condition of the seal on
a regular basis.
If you notice damage to the seal,
please contact the nearest service
centre immediately. Do not use
the oven until the seal has been
replaced.