Operation Manual

66 progress
How to use the pyrolytic cleaning function
Before activating the pyrolytic
cleaning function, remove any
excessive spillage and make sure
that the oven is empty. Do not
leave anything inside it (e.g. pans,
grids, baking tray, drip pan, etc.)
as they could become severely
damaged.
Ensure that the oven door is
closed before activating the
pyrolytic cleaning function.
When the pyrolytic cleaning
function is on, it is advisable not
to use the hob as this could cause
overheating and damage the
appliance.
During the pyrolytic cleaning cycle
the oven door becomes very hot.
Children should be kept away until
it has cooled.
Choose this function to clean the oven
by pyr
olysis.
The following pyro levels are available:
Pyrolytic 1 (P I), Time: 2 hours. = 30 mins
Heating-up +1 hour. at 480 °C + 30 mins
Cooling down time.
Pyrolytic 2 (P 2), Time: 2 hours. 30 mins.
= 30 mins Heating-up +1 hour. 30 mins. at
480 °C + 30 mins Cooling down time.
The pyro duration time cannot be
changed.
Before performing the pyrolysis, all
side rails must have been removed.
Removal
Take hold of the side rails on one side of
the oven and undo the knurled nut at the
front. Lift the side rails at the back in order to
unhook them.