Operation Manual

65 progress
Pyrolytic cleaning
The oven cavity is coated with a special
enamel resistant to high temperatures.
During the pyrolytic cleaning operation,
the temperature inside the oven can reach
about 500°C thus burning food residues.
For your security, during the pyrolytic clean-
ing operation, the oven door automatically
locks when the temperature inside the oven
approaches about 500 °C. 300 °C has been
reached.
Upon completion of the cleaning opera-
tion, the oven door will be locked until the
oven cavity has cooled down.
The cooling fan operates during cooking
until the oven has cooled down. After cook-
ing, it is advisable to remove all the food resi-
dues with a wet sponge.
However, from time to time, it will be
necessary to do a more complete and thor-
ough cleaning, using the pyrolytic cleaning
function. You can select two different levels of
pyrolytic cleaning depending on how dirty the
oven is.
If the oven cavity is not very dirty, we
recommend that you select the pyrolytic 1
function (P I) in the programmer display.
It is advisable to wipe the oven over with
a soft sponge soaked in warm water after
each pyrolytic cleaning cycle is carried out.
If the oven cavity is very dirty, we advise
you to select the pyrolytic 2 function (P 2) in
the programmer display.
During the pyrolytic cleaning function, it is
not possible to use the oven for 2 hours when
selecting the Pyr 1 function and up to 2 1/2
hours when the Pyr 2 function is active.
The Pyro reminder recommends that
a pyrolytic cleaning function should
be carried out after several baking
and roasting processes and
depending on dirty the oven is. An
acoustic signal will be heard and the
indication
Pyro is displayed for
approx. 15 seconds and then a
second acoustic signal can be heard.
Depending on how dirty the oven is,
select the most suitable pyr
olytic
cleaning function.
For as long as no complete cleaning
function is carried out, Pyro
r
eminders are displayed each time
the oven is switched off.