User manual

Using the Function Lock
You can activate the function only when the
appliance operates.
The Function Lock prevents an accidental
change of the oven function.
1. To activate the function activate the
appliance.
2. Activate an oven function or setting.
3. Touch and hold
and at the same
time for 2 seconds.
An acoustic signal sounds.
Loc comes on in the display.
To deactivate the Function Lock repeat
step 3.
You can deactivate the
appliance when the Function
Lock is on. When you deactivate
the appliance, the Function Lock
deactivates.
Using the settings menu
You can set the settings menu only when
the appliance is deactivated.
The settings menu lets you activate or
deactivate functions in the main menu. The
display shows SET and the number of the
setting.
Description Value to set
1 SET + GO ON / OFF
2 RESIDUAL HEAT INDICATOR ON / OFF
3
KEY TONE
1)
CLICK / BEEP / OFF
4 FAULTY TONE ON / OFF
5 SERVICE MENU -
6 RESTORE SETTINGS ON / OFF
1)
It is not possible to deactivate the tone of the ON / OFF sensor field.
1. When the appliance is deactivated,
touch and hold for three seconds.
The display shows SET1 and "1" flashes.
2. Touch or to set the setting.
3. Touch .
4. Touch or to change the value of
the setting.
5. Touch .
Automatic Switch-off
For safety reasons the appliance
deactivates automatically after some time if
an oven function operates and you do not
change any settings.
Temperature (°C) Switch-off time
(h)
30 - 115 12.5
120 - 195 8.5
200 - 245 5.5
250 - maximum 1.5
After the Automatic switch-off, touch a
sensor field to operate the appliance again.
The Automatic switch-off does
not work with the functions:
Light, Slow Cooking, Duration,
End, Time delay.
Brightness of the display
There are two modes of display brightness:
Progress 15