User manual

16 progress
Changing the interior light
Separate the appliance from the
power supply by switching off
the fuse.
If the oven bulb needs replacing, the new
bulb must have the following specifications:
- Electric power: 15 W / 25 W
- Electric rate: 230 V (50 Hz)
- Heat resistance to 300°C
- Connection type: E14
These replacement bulbs can be
purchased from your dealer.
To change the oven bulb:
1. Before proceeding ensure the oven is cool
and is disconnected from the electricity
supply.
2. Twist the bulb’s glass cover in an anti-
clockwise direction.
3. Remove the burnt out bulb and replace it
with a new one.
4. Replace the glass cover and reconnect
the oven to the electricity supply.
1
2
3
Oven shelf support rails
The shelf support rails on the left and right
hand sides of the oven can be removed for
cleaning the side walls.
Removing the shelf support rails
First pull the front of the rail away from the
oven wall and then unhitch at the back (1, 2).
Fitting the shelf support rails
To install, first reattach the rails at the back,
then put them into position at the front and
press them into place (3).
To clean the shelf support rails, soak in warm
soapy water and remove stubborn marks
with a well wetted soap impregnated pad.
Rinse well and dry with a soft cloth.