User manual

Operation
56 4
1
8
7
2
3
1 Display
2
“Minute minder” pilot lamp
3
“Clock” pilot lamp
4
Button “
”
5
Function selector button
6
Button “
”
7
“End of cooking time” pilot lamp
8
“Cooking time” pilot lamp
The oven will only work when the
clock has been set. However, the oven
can also be operated without any pro-
gramme having been selected.
In the event of a power failure, all settings
(clock time, programme setting or pro-
gramme in operation) will be cancelled.
When the power supply is restored
again, the numbers in the display flash.
If this happens, the clock and timer must
be re-set.
Setting the clock
When the power is switched on or if a power
failure occurs, the “Clock”
pilot lamp will
flash in the display.
To set the clock:
1.
Press the button “
” or “ ”.
2.
Then wait 5 seconds: the “Clock”
pilot
lamp will go out and the display will show
the set time. The appliance is now ready
for use.
To reset the correct clock time:
1.
Press the button
repeatedly to select
the “Clock” function. The relevant pilot
lamp will start flashing. Then proceed as
described above.
The clock time can only be reset if no au-
tomatic function (cooking time
or
end of cooking time
) has been set.
30 progress