User manual

progress 51
Telescopic Shelf Supports and Catalytic Panels
The shelf supports and the catalytic panels can be
removed for easy cleaning.
Make sure the appliance is completely
cooled before carrying out this
operation.
Proceed as follows:
1) remove the front screw while keeping the shelf
support and the catalytic panel in position with
the other hand (see diagram 1);
2) keep the shelf support and the catalytic panel in
position and lift them with a hand while
disengaging the rear hook. Take off the shelf
support and the catalytic panel (see diagram 2);
Clean the telescopic shelf supports on the
outside only with commercially available
detergents.
Important: The telescopic shelf supports must
not be cleaned in the dishwasher.
IMPORTANT: the rollers must not be greased.
3) Reattach the telescopic shelf supports and the
catalytic panel after cleaning; proceed in
reverse order.
Please, ensure the retaining nuts are secure when
refitting the shelf support and the catalytic panel.
Changing the interior light
Separate the appliance from the
power supply by switching off the
fuse.
If the oven bulb needs replacing, the new bulb
must have the following specifications:
- Electric power: 15 W / 25 W
- Electric rate: 230 V (50 Hz)
- Heat resistance to 300°C
- Connection type: E14
These replacement bulbs can be purchased
from your dealer.
To change the oven bulb:
1. Before proceeding ensure the oven is cool and
is disconnected from the electricity supply.
2. Twist the bulb’s glass cover in an anti-
clockwise direction.
3. Remove the burnt out bulb and replace it with
a new one.
4. Replace the glass cover and reconnect the
oven to the electricity supply.
1
2
)