User manual

progress 39
Press the button repeatedly to select
the "Cooking end time" function. The relevant
control light starts flashing. Then, proceed
as follows:
To set the end of cooking time:
1. Press the button " " or " ".
2. After you have made the setting, wait 5
seconds: the control light "Cooking end
time"
lights up and the time is shown
on the display again.
3. When the programmed time is up, the
oven switches itself off automatically. An
audible signal sounds and the control
light flashes. Turn the oven function and
the temperature control knobs to zero.
The signal sound can be turned off by
pressing any button. NOTE: By turning
off the audible signal the oven is reset to
manual operation. If the oven controller
and the temperature controller are not
turned to zero, the oven heats up again.
To cancel the programmed end of
cooking time:
1. Press the button
repeatedly to select
the "Cooking end time" function. The rele-
vant control light
flashes and the
programmed cooking end time is
shown on the display.
2. Press the button "
" until the time is
shown in the display. The timer beeps
and the indicator goes out.
Setting both "Cooking time"
and
"Cooking end time"
The "Cooking time" and "Cooking end
time" functions can be used simultaneously
so that the oven can automatically be
turned off and then on again at a later time.
End of cooking time
With this function, you can set the oven
to switch off automatically when a
programmed end of cooking time is over.
Put the food in the oven, select a cooking
function, and set the cooking temperature
you want.