Operation Manual

CLOCK FUNCTIONS

Electronic programmer

1 2 3

456

Function indicators

Time display

Function indicators

Button +

Selection button

Button -

Clock function Application

Time of day To set, change or check the time of day.

Minute Minder To set a countdown time. This function has no effect on the opera-

tion of the oven.

Duration To set how long the appliance must operate.

End To set when the appliance must be deactivated.

You can use Duration and End

at the same time to set the time when

the appliance must be activated and

then deactivated. First set Duration

then End

Setting the clock functions

For Duration

and End , set an

oven function and temperature. This is

not necessary for the Minute Minder

2. Press the Selection button again and

again until the indicator for the neces-

sary clock function flashes.

3. Press + or - to set the time for the nec-

essary clock function.

The display shows the indicator for the

clock function you set. When the set

time ends, the indicator flashes and an

acoustic signal sounds for two minutes.

With the Duration and End func-

tions, the appliance deactivates auto-

matically.

progress 25