User manual

can cause damage to the nonstick
coating.
Clean the moisture from the cavity after
each use.
Recommended cleaning
products
Do not use abrasive sponges or
aggressive detergents. It can cause
damage to the enamel and the stainless
steel parts.
You can buy our products at and at the
best retailer shops.
Removing the shelf supports
Before maintenance, make sure that the
oven is cool. There is a risk of burns.
To clean the oven, remove the shelf
supports.
1. Pull carefully the supports up and out
of the front catch.
2
3
1
2. Pull the front end of the shelf support
away from the side wall.
3. Pull the supports out of the rear catch.
Install the shelf supports in the opposite
sequence.
Submenu for: Cleaning
The submenu with cleaning functions is
under the sensor field .
Symbol Menu item Description
S1 Tank Emptying Procedure for removing the residual water
from the water drawer after use of the steam
functions.
S2 Steam Cleaning Cleaning the appliance with steam.
S3 Descaling Procedure for cleaning the steam generation
circuit from residual limestone.
S4 Rinsing Procedure for rinsing and cleaning the
steam generation circuit after frequent use
of the steam functions.
Activating a cleaning function
1. Activate the appliance.
2. Touch until the display showsS1. In
some models you can also choose S2,
S3, S4.
3. Touch or to select a cleaning
function.
4. Touch to confirm.
Tank Emptying - S1
Remove all accessories.
The cleaning function removes the
residual water from the water drawer. Use
the function after the steam cooking
function.
The duration of the function is around 6
minutes.
The light in this function is off.
1. Put the tray on the first shelf position.
2. Activate Tank Emptying function - S1.
Refer to "Activating a cleaning
function".
3. Touch .
42 Progress