User manual

CLOCK FUNCTIONS
Clock functions table
Clock function Application
TIME OF DAY To set, change or check the time of day.
DURATION To set how long the appliance operates.
END To set when the appliance deactivates.
TIME DELAY To combine DURATION and END function.
MINUTE MINDER To set countdown time. This function has no effect on the oper-
ation of the appliance. You can set the MINUTE MINDER at any
time, also when the appliance is off.
Setting and changing the time
You must set the time before you operate
the oven.
The flashes when you connect the
appliance to the electrical supply, when
there was a power cut or when the timer is
not set.
Press the or to set the correct time.
After approximately five seconds, the
flashing stops and the display shows the
time of day you set.
To change the time of day press again
and again until starts to flash.
Setting the DURATION
1.
Set an oven function and temperature.
2.
Press
again and again until
starts to flash.
3. Press
or to set the DURATION
time.
The display shows .
4. When the time ends, flashes and an
acoustic signal sounds. The appliance
deactivates automatically.
5. Press any button to stop the acoustic
signal.
6. Turn the knob for the oven functions
and the knob for the temperature to the
off position.
Setting the END
1. Set an oven function and temperature.
2. Press
again and again until starts
to flash.
3. Press or to set the time.
The display shows
.
4. When the time ends, flashes and an
acoustic signal sounds. The appliance
deactivates automatically.
5.
Press any button to stop the signal.
6.
Turn the knob for the oven functions
and the knob for the temperature to the
off position.
Setting the TIME DELAY
1.
Set an oven function and temperature.
2.
Press
again and again until
starts to flash.
3. Press
or to set the time for
DURATION.
4. Press
.
5. Press or to set the time for END.
6. Press to confirm.
10 Progress