User manual

Problem Possible cause Remedy
The water in the cavity em‐
bossment does not boil.
The temperature is too low. Set the temperature at least
to 110 °C.
Refer to "Hints and tips"
chapter.
The water comes out of the
cavity embossment.
There is too much water in
the cavity embossment.
Deactivate the oven and
make sure that the appli‐
ance is cold. Wipe the water
with a cloth or sponge. Add
the correct amount of water
to the cavity embossment.
Refer to the specific proce‐
dure.
The display shows "12.00". There was a power cut. Reset the clock.
Service data
If you cannot find a solution to the problem
yourself, contact your dealer or an
Authorised Service Centre.
The necessary data for the service centre
is on the rating plate. The rating plate is
on the front frame of the oven cavity. Do
not remove the rating plate from the oven
cavity.
We recommend that you write the data here:
Model (MOD.) .........................................
Product number (PNC) .........................................
Serial number (S.N.) .........................................
ENERGY EFFICIENCY
Product information according to EU 65-66/2014
Supplier's name Progress
Model identification
PBD34101B 949499051
PBD34101X 949499030
Energy Efficiency Index 95.3
Energy efficiency class A
Energy consumption with a standard load, conventional
mode
0.93 kWh/cycle
Energy consumption with a standard load, fan-forced
mode
0.81 kWh/cycle
Progress 29