user manual Ceramic glass hob PAS6100E
progress Contents Safety Information Description of the Appliance Operating the Appliance Tips on Cooking and Frying Care and cleaning 2 3 4 4 5 What to do if ... Disposal Installation Instructions Service 6 7 7 9 Subject to change without notice Safety Information Warning! Please comply with these instructions. If you do not, any damage resulting is not covered by the warranty.
progress 3 • Do not use the cooking zones with empty cookware or without cookware. • To avoid damaging cookware and glass ceramics, do not allow saucepans or frying pans to boil dry. Description of the Appliance Cooking surface layout 1 2 m 3 1. 2. 3. 4. 5. 6.
progress down. Look at the residual heat indicator. Residual heat can be used for melting and keeping food warm. Operating the Appliance of all ceramic glass cooking zones and does not impair either the function or the life of the appliance. Setting the heat setting When a cooking zone is switched on, it may hum briefly. This is a characteristic Heat setting Ring control knob Knob setting To increase Turn clockwise 1-9 To reduce Turn anti-clockwise 9-1 Switch off 0 1.
progress 5 Examples of cooking applications The information given in the following table is for guidance only. Heat setting Cooking process 0 Suitable for Cooking time Tips/Hints Off position 1 Keeping food warm Keeping cooked foods warm as required Cover 1-2 Melting Hollandaise sauce, melting butter, chocolate, gelatine 5-25 mins. Stir occasionally Solidifying Fluffy omelettes, baked eggs 10-40 mins.
progress Warning! Residues from cleaning agents will damage the appliance. Remove residues with water and washing up liquid. Cleaning the appliance after each use 1. Wipe the appliance with a damp cloth and a little washing up liquid. 2. Rub the appliance dry using a clean cloth. Removing deposits 1. Place a scraper on the glass ceramic surface at an angle. 2. Remove residues by sliding the blade over the surface. 3. Wipe the appliance with a damp cloth and a little washing up liquid. 4.
progress 7 Disposal The symbol on the product or on its packaging indicates that this product may not be treated as household waste. Instead it should be taken to the appropriate collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product.
progress Assembly 2 1 min. 500mm min.
progress 9 min. 38 mm PAS 6100 E P E E 2011 949 592 998 230 V 50 Hz 6,0 kW PROGRESS Service In the event of technical faults, please first check whether you can remedy the problem yourself with the help of the operating instructions (section “What to do if…”). If you were not able to remedy the problem yourself, please contact the Customer Care Department or one of our service partners.
progress
progress 11
www.progress-hausgeraete.
