user manual Ceramic Glass Hob PAS6060E
progress Contents Safety instructions Description of the Appliance Operating the appliance Tips on Cooking and Frying Cleaning and Care 2 3 4 8 10 What to do if … Disposal Installation Instructions Service 11 12 12 14 Subject to change without notice Safety instructions Warning! Please comply with these instructions. If you do not, any damage resulting is not covered by the warranty.
progress 3 • Objects that melt and things that boil over can burn onto the glass ceramic and should be removed straightaway. • To avoid damaging cookware and glass ceramics, do not allow saucepans or frying pans to boil dry. • Do not use the cooking zones with empty cookware or without cookware. Description of the Appliance Cooking surface layout 2 1 m 5m 1. 2. 3. 4. 5.
progress Touch Control sensor fields The appliance is operated using Touch Control sensor fields. Functions are controlled by touching sensor fields and confirmed by displays and acoustic signals. Touch the sensor fields from above, without covering other sensor fields.
progress 5 Control panel To switch off Touch and Indicator at the same time The keep warm setting lies between and . It is used to keep food warm. Before an outside ring can be switched on, the inside ring must be switched on. Switching the outside ring on and off By switching the outside rings on or off, the effective heating surface can be matched to the size of the cookware.
progress Heat setting Length of the automatic warm up [min:sec] 0:30 1:00 1:40 4:50 6:30 10:10 2:00 3:30 4:30 --- Using the child safety device The child safety device prevents unintentional use of the appliance. Switching on the child safety device Step 1. Control panel Display/Signal Switch on appliance. (Do not set a heat setting.) 2. Touch for 4 seconds The child safety device is switched on. Switching off the child safety device Step 1. Control panel Display/Signal Switch on appliance.
progress 7 within approx. 10 seconds, otherwise the appliance automatically switches itself off. Using the timer Function Condition Outcome after the time has elapsed Automatic cut-out a heat setting is set acoustic signal 00 flashes Cooking zone switches off Countdown timer cooking zones not in use acoustic signal 00 flashes If a heat setting is set on this cooking zone in addition to a countdown timer, the cooking zone is switched off after the time set has elapsed.
progress Changing the time Control panel Indicator 1. Step Select cooking zone Pilot light of the selected cooking zone flashes faster Time remaining is displayed 2. Touch or 01 to 99 minutes After a few seconds, the pilot light flashes more slowly. The time is set. The time counts down. Displaying the time remaining for a cooking zone Step 1.
progress 9 Always place cookware on the cooking zone before it is switched on. Energy saving If possible, always place lids on the pans. Switch cooking zones off before the end of the cooking time, to take advantage of residual heat. Bottom of pans and cooking zones should be the same size. Examples of cooking applications The information given in the following table is for guidance only.
progress Heat setting Cooking process Suitable for Cooking time Tips/Hints 6-7 Gentle Frying Frying escalopes, veal cordon bleu, cutlets, rissoles, sausages, liver, roux, eggs, pancakes, doughnuts Steady frying Turn halfway through cooking 7-8 Heavy Frying Hash browns, loin steaks, steaks, Flädle (pancakes for garnishing soup) 5-15 mins.
progress 11 What to do if … Problem The cooking zones will not switch on or are not functioning Possible cause Remedy More than 10 seconds have Switch the appliance on again. passed since the appliance was switched on The child safety device is switched on Deactivate child safety device (See the section “Child safety device”) Several sensor fields were touched at the same time Only touch one sensor field Automatic switch off has been triggered Remove any objects (pan, cloths, etc.
progress If the appliance has been wrongly operated, the visit from the customer service technician or dealer may not take place free of charge, even during the warranty period. Disposal The symbol on the product or on its packaging indicates that this product may not be treated as household waste. Instead it should be taken to the appropriate collection point for the recycling of electrical and electronic equipment.
progress 13 Assembly 2 1 min. 500mm min.
progress PAS 6060 E 55HAD47AO 949 593 000 230 V 50 Hz 7,0 kW PROGRESS Service In the event of technical faults, please first check whether you can remedy the problem yourself with the help of the operating instructions (section “What to do if…”). If you were not able to remedy the problem yourself, please contact the Customer Care Department or one of our service partners.
progress 15
www.progress-hausgeraete.
