User manual

Attaching the seal
1. Clean the worktop around the cut out
area.
2. Attach the supplied seal stripe to the
lower edge of the hob along the outer
edge of the glass ceramic. Do not
extend it. Make sure that the ends of
the seal stripe are located in the middle
of one side of the hob.
3. Add some mm when you cut the seal
stripe to the length.
4. Push the two ends of seal stripe
together.
Assembly
min.
50mm
min.
500mm
490 mm
270 mm
R 5mm
55 mm
0
+1
0
+1
min.
28 mm
min.
12 mm
min.
20 mm
20 Progress