Operation Manual

Step Control panel Display/Signal
2.
Touch of both the cooking zones at the front simultane-
ously for 4 seconds.
3.
Switch the appliance on.
The child safety device is switched off.
Switching off the child safety device
Step Control panel Display/Signal
1.
Switch on the appliance. (Do not set a heat setting.)
2.
Touch of both the cooking zones at the front simultane-
ously for 4 seconds.
3.
Switch the appliance off.
The child safety device is switched off.
The child safety device can only be
switched on and off, if no heat setting is
set.
Overriding the child safety device
The child safety device can be switched off
in this way for a single cooking session; it re-
mains activated afterwards.
Step Control panel Display/Signal
1.
Switch the appliance on
2.
Touch of both the cooking zones at the front simultane-
ously for 4 seconds.
Until the appliance is next switched off, it can used as normal. After switching off the appliance, the
child safety device is active again.
After overriding the child safety device, a
heat setting or a function must be set
within approx. 10 seconds, otherwise
the appliance automatically switches it-
self off.
Automatic switch off
Cooking surface
• If after switching on the cooking surface, a
heat setting is not set for a cooking zone
within approx. 10 seconds, the cooking
surface automatically switches itself off.
• If one or more sensor fields are covered by
objects (a pan, cloths, etc.) for longer than
approx. 10 seconds, the cooking surface
switches off automatically.
• If all cooking zones are switched off, the
cooking surface automatically switches it-
self off after approx. 10 seconds.
Cooking zones
If one of the cooking zones is not switched
off after a certain time, or if the heat setting is
not modified, the relevant cooking zone
switches off automatically.
is displayed.
Before being used again, the cooking zone
must be set to
.
Heat setting Switches off after
-
6 hours
-
5 hours
4 hours
-
1.5 hours
16 progress