user manual Ceramic glass induction hob PAI6000E
progress CONTENTS Safety information Installation Description of the appliance Operating the appliance 2 3 5 6 Helpful hints and tips 8 Care and cleaning 9 What to do if... 10 Environment concerns 11 Subject to change without notice For your safety and correct operation of the appliance, read this manual carefully before installation and use. Always keep these instructions with the appliance even if you move or sell it. Users must fully know the operation and safety features of the appliance.
progress 3 INSTALLATION Before the installation , note down the serial number (Ser. Nr.) from the rating plate. The rating plate of the appliance is on its lower casing. 949 594 031 00 PAI6000E 58 GAD D5 AU 220-240 V 50-60-Hz Induction 7,4 kW 7,4 kW PROGRESS Safety instructions Warning! You must read these! Make sure that the appliance is not damaged because of transportation. Do not connect a damaged appliance. If it is necessary, speak to the supplier.
progress Assembly min. 500 mm min. 50 mm min. 50 mm min. 5 mm R 5mm = 600mm 490+1mm 560+1mm = min. 20 mm min. 25 mm min. 5 mm min. 38 mm min.
progress 5 DESCRIPTION OF THE APPLIANCE Cooking surface layout 1 2 180 180 210 145 mm 1 Induction cooking zone 1800W 2 Induction cooking zone 1800W 3 Induction cooking zone 1400 W, with Power function 2500W 4 Control panel 5 Induction cooking zone 2300W, with the Power function 3700W mm 3 mm mm 5 4 Control panel layout 1 2 3 4 5 9 6 7 8 Use the sensor fields to operate the appliance. Displays, indicators and sounds tell which functions operate.
progress Heat setting displays Display Description The cooking zone is off The cooking zone operates - Keep warm setting is on The Automatic heat up function is on The induction cooking zone does not sense the cookware There is a malfunction A cooking zone is still hot (residual heat) Lock/Child safety device is on Power function is active The automatic switch off is active The induction cooking zones make the heat directly in the bottom of the cookware.
progress 7 Automatic Heat Up Power management 11 10 9 8 7 6 5 4 3 2 1 0 1 2 3 4 5 6 7 8 9 You can get a necessary heat setting in a shorter time if you activate the Automatic Heat Up function. This function sets the highest heat setting for some time (see the graphic), and then decreases to the necessary heat setting. To start the Automatic Heat Up function: 1. Touch . comes on in the display. 2. Touch again and again until comes on in the display. 3.
progress You can use the timer as a minute minder while cooking zones do not operate. Touch . Touch or of the timer to select the time. When the time elapses, the sound operates and 00 flashes. Locking / unlocking the control panel . You can lock the control panel, but not It prevents an accidental change of the heat setting during a cooking session. . The symbol Touch the symbol comes on for 4 seconds. The Timer still operates. Touch the symbol to switch off this function.
progress 9 Heat setting Use to: Time Hints Keep cooked foods warm as required Cover 1-2 Hollandaise sauce, melt: butter, chocolate, gelatine 5-25 min Mix occasionally 1-2 Solidify: fluffy omelettes, baked eggs 10-40 min Cook with a lid on 2-3 Simmer rice and milkbased dishes, heat- 25-50 ing up ready-cooked meals min Add at least twice as much liquid as rice, stir milk dishes part way through 3-4 Steam vegetables, fish, meat 20-45 min Add a few tablespoons of liquid 4-5 Steam potatoes
progress WHAT TO DO IF... Problem Possible cause and remedy You cannot start the appliance or operate it. • You touched 2 or more sensor fields at the same time. Only touch one sensor field. • There is water or fat stains on the control panel. Clean the control panel. • The child safety device or key lock operates. See the chapter Operating the appliance. • Start the appliance again and set the heat setting in 10 seconds.
progress 11 ENVIRONMENT CONCERNS The symbol on the product or on its packaging indicates that this product may not be treated as household waste. Instead it should be taken to the appropriate collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product.
www.electrolux.
