user manual Ceramic glass induction hob PAI6000E
electrolux Electrolux. Thinking of you. Share more of our thinking at www.electrolux.com Contents Safety Information Description of the Appliance Operating the appliance Tips on cooking and frying Cleaning and Care 2 3 4 8 10 What to do if ... Disposal Installation Instructions Service 11 12 12 15 Subject to change without notice Safety Information Warning! Please comply with these instructions. If you do not, any damage resulting is not covered by the warranty.
electrolux 3 Safety when cleaning • For cleaning, the appliance must be switched off and cooled down. • For safety reasons, the cleaning of the appliance with steam jet or high-pressure cleaning equipment is not permitted. • • How to avoid damage to the appliance • The glass ceramic can be damaged by objects falling onto it. • The edge of the glass ceramic can be damaged by being knocked by the cookware.
electrolux 7. Timer 8. On/Off with power indicator Touch Control sensor fields The appliance is operated using Touch Control sensor fields. Functions are controlled by touching sensor fields and confirmed by displays and acoustic signals. Touch the sensor fields from above, without covering other sensor fields.
electrolux 5 Control panel Switch off Touch Display for 1 second / none After switching on, within approx. 10 seconds a heat setting or a function must be set, otherwise the appliance automatically switches itself off.
electrolux Switching the power function on and off makes additional The power function power available to the front induction cooking zones, e.g. to bring a large volume of water to the boil. The power function is activated for 8 minutes for the front left cooking zone and for 5 minutes for the front right cooking zone. After these times, the induction cooking zones automatically return to cooking level .
electrolux 7 Selecting a cooking zone Ste p Control panel Display 1. Touch once Pilot light of the first cooking zone flashes 2. Touch once Pilot light of the second cooking zone flashes 3. Touch once Pilot light of the third cooking zone flashes 4. Touch once Pilot light of the fourth cooking zone flashes The heat setting indicator of the selected cooking zone goes out, as long as the timer time can be set.
electrolux Step Control panel field Display After a few seconds the pilot light flashes more slowly. The time is set. The time counts down. Displaying the time remaining for a cooking zone Step Control panel field 1. Select cooking zone Display Pilot light of the cooking zone selected flashes faster The time remaining is displayed After a few seconds the pilot light flashes more slowly. Switching off the acoustic signal Step 1.
electrolux 9 * Cookware for induction cooking zones is labelled as suitable by the manufacturer. Suitability test Cookware is suitable for induction cooking, if … • ... a little water on an induction cooking zone set to the highest heat setting is heated within a short time. • ... a magnet sticks to the bottom of the cookware. Certain cookware can make noises when being used on induction cooking zones. These noises are not a fault in the appliance and do not affect operation in any way.
electrolux Heat setting Cooking process suitable for Cook time 5-15 mins. per pan Tips/Hints 7-8 Heavy frying Hash browns, loin steaks, steaks, Flädle (pancakes for garnishing soup) Turn halfway through cooking 9 Boiling Searing Deep frying Boiling large quantities of water, cooking pasta, searing meat (goulash, pot roast), deep frying chips The power function is suitable for heating large quantities of liquid. Cleaning and Care Warning! Risk of burns from residual heat.
electrolux 11 What to do if ... Problem Possible cause Remedy The appliance cannot be switch- More than 10 seconds have Switch the appliance on again.
electrolux Problem and number are displayed Possible cause Electronics fault If you are unable to remedy the problem by following the above suggestions, please contact your dealer or the Customer Care Department. Warning! Repairs to the appliance are only to be carried out by qualified service engineers. Considerable danger to the user may result from improper repairs.
electrolux 13 stallation may only be carried out by a qualified electrician. The minimum distances to other appliances and units are to be observed. Anti-shock protection must be provided by the installation, for example drawers may only be installed with a protective floor directly underneath the appliance. The cut surfaces of the worktop are to be protected against moisture using a suitable sealant. The sealant seals the appliance to the work top with no gap.
electrolux 2 1 60 0 1 49 0+ 56 0+ 1 R5
electrolux 15 PAI 6000 E 55GADD5AU 230 V PROGRESS Service In the event of technical faults, please first check whether you can remedy the problem yourself with the help of the operating instructions (section “What to do if…”). If you were not able to remedy the problem yourself, please contact the Customer Care Department or one of our service partners.
www.electrolux.
