Installation & Assembly

Well Light (P5295)
Remove from carton. Select mounting location and remove dirt, mulch or deck material so fixture is well seated and will
maintain the aiming position you select. Fixture lip should remain above grade. Attach fixture connector (included) to the
main low-voltage cable.
Floodlight (P5299)
Remove from carton. Select spike or deck mount and attach with wing-nut. If deck mounting on a flat surface, secure the
adapter to mounting surface. If spike mounting, press into dirt or mulch while holding the spike. Do not push from head
as damage can occur. Loosen wing-nut to adjust aiming and re-tighten to lock in place. Attach fixture connector
(included) to the main low-voltage cable.
Deck Lights
Remove from carton. Remove two cover screws, cover, and lens and align at desired mounting location.
Two mounting screws are provided for typical mounting. Securely mount taking care not to damage the
LED light source. Replace lens and cover. Attach fixture connector (included) to the main low-voltage
cable.
P5296 P5246
Path Light – Shell (P5225)
A versatile path light with adjustment of the head from full cutoff (horizontal) to 45 degree up-tilt for flood affect. Carefully
remove from carton protecting head assembly. Slip staff into head fitter and tighten set screw. Tighten knuckle screw to
prevent movement while mounting. Select spike or deck adapter mounting. Mount as desired. Loosen the knuckle screw
to adjust tilt and re-tighten. Attach fixture connector (included) to the main low-voltage cable.
Path Lights
Carefully remove from carton protecting head assembly.
Connect staff to head by carefully threading or slipping the staff
in place. Select spike or deck adapter mounting. If deck
mounting on a flat surface, secure the adapter to mounting
surface, insert fixture staff, and tighten set screw. If spike
mounting, insert staff into spike and tighten set screw. When
locating the spike fixture, press into dirt or mulch while holding
the spike. Do not push from head or staff as damage can occur.
Attach fixture connector (included) to the main low-voltage cable.
P5297 P5298 P5245 P5247
93033064 (04/22/14)