Installation Guide

Compact Fluorescent 6” Single Vertical Lamp Recessed
Housing
IC/Air-Tight
Type
P88-ICAT
Dimensions (Inches)
Catalog No. Lamping A B C
P88-ICAT (1) 18w Quad or Triple CF (4-pin) 7-7/8 10-3/4 7-1/2
Ceiling Opening 6-7/8
Specifications:
Wiring
• Universal junction box with snap-out sides
• Removable housing for field inspection
of wiring
• Grounding pigtail
• Knockout free Romex clamps
• 1/2” & 3/4” Knock outs for rigid or BX
fittings
• Electronic NPF 120-volt ballast (located
inside junction box)
Construction
• Notched housing for chalkline alignment
• Overspray protection
• Full wrap-around plaster frame
• Removable K.O. for remodel use (P8607-
01 plaster frame clips also required)
• Galvanized steel construction
• Housing adjusts from 1/2” to 2-1/2”
thick ceilings
Bar Hangers
• Integral nailers for wood joist
construction
• Integral T-bar mounting clamps
• Span 24” T-bar spacing
• Lock to secure housing
• Captive
• 90-degree mounting for tight spaces
Labeling
• UL-CUL listed for damp locations
• Not rated for through branch wiring, but
can be daisy chained
• IC rated
Lamp/Trim
• Trim-Lok
®
action forces trim to fit snugly
against the ceiling
• Single-lamp vertical 18w (4-pin) G24q-2
compact fluorescent
Progress Lighting
701 Millennium Blvd.
Greenville, South Carolina
29607
www.progresslighting.com
Rev. 4/12
C
A
B