Installation Guide

Specifications:
Wiring
• Universal junction box with snap-out sides
• Removable housing for field inspection of
wiring
• Grounding pigtail
• Knockout free Romex clamps
• 1/2” & 3/4” Knock outs for rigid or BX
fittings
• Pre-Installed wire quick connects
• Thru-branch wiring for #12 90º conductors
(4 in/4 out)
Construction
• Housing adjusts for ceiling thickness from
1/2” to 1-1/2” thick
• Full wrap-around plaster frame
• Removable K.O. for remodel use (P8607-01
plaster frame clips also required)
• Galvanized steel construction
• Porcelain socket with nickel-plated brass
screw shell
•
Notched housing for chalkline alignment
• Pre-installed disposable plastic cap protects
socket screw shell from paint overspray
• Socket can be used as a temporary work light
with ‘A’ lamp
Bar Hangers
• Integral nail for wood joist construction
• Integral snap-on T-bar mounting clip
• Span 24” T-bar for suspended ceilings
• Lock to secure housing
• Captive with joist alignment tabs
• 90-degree mounting for tight spaces
Labeling
• IC and Non-IC rated
• Performance tested to ASTM E283 Air Tight
requirements, including IECC, CA Title 24
and Washington State Energy Codes
• UL-CUL listed for damp location and through
branch wiring
• Approved for use in New York City per
calendar #40330.
Lamp/Trim
• Socket mounts to trim for optimum
performance, and provides consistent vertical
lamp position
• Trim-Lok
®
action forces trim to fit snugly
against the ceiling
Progress Lighting
701 Millennium Blvd.
Greenville, South Carolina
29607
www.progresslighting.com
Patent# 5758959
Incandescent 6” Housing Recessed
IC, Non-IC, & Air Tight
w/Quick Connects
Type
P87-ATQC
Dimensions (Inches)
Catalog No. Lamping A B C
P87-ATQC See Trim Specifications 7-7/8 10-3/4 7-1/4
Ceiling Opening 6-7/8
Rev. 11/13
A
B
C
Side view