OGRESS WEIGHTING“ P810019 7" SQUARE PACKAGE CONTENTS EDGE LIT PANELS PART| DESCRIPTION QUANTITY A | Fixture 1 ATTACH YOUR RECEIPT HERE Purchase Date HARDWARE CONTENTS (not actual size) Mounting plate Wire nut Qty:1 Quirky Missing parts? Please contact Customer Service at 1-800-447-0573 or @ customer service @progresslighting.
A Safety Information Please read and understand this entire manual before attempting to assemble, operate or install the product. CAUTION: Read instructions carefully and tum electricity off at main circuit breaker panel before beginning installation. CAUTION: Risk of fire. Min. 90°C supply conductors. Consult a qualified electrician to ensure comet branch circuit conductor. WARNING: If any Special Control Devices are sad with this fixture, follow instructions carefully to assure full compliance with N.E.C.
ASSEMBLY INSTRUCTIONS 2 2. Strip 3/8 of insulation from the electrical wire ends. Using wire nuts (BB), connect white fixture wire to the white supply wire from the junction box; connect the fixture black wire to the black supply wire. Connect the fixture ground wire and supply ground wire using a wire nut or by fastening to the ground screw on the crossbar. Push all wire connections into the outlet box. Hardware Used E X3 3. Attach fixture (A) onto the mounting plate (AA).
