Specification Sheet

Page 1 of 4
LED 6" Pro-Optic
®
LED Retrofit Downlight Recessed
120-277V
0-10V Dimming
Type
-EB -EBSD
All Items P8002
LED Housing Suitable Plaster Frame
Catalog No. Description Lamping Aperture Range (see Notes)
P8002-EB 6" LED Retrofit Hsg. See Trim Specifications 6-1/8" min. to 6-7/8" max.
P8002-EBSD 6" LED Retrofit Hsg. See Trim Specifications 5-15/16" min. to 6-1/8" max.
Small Diameter
Housing Accessory
P8100-01 6" Ring Accessory 6-1/2" min. to 6-7/8" max.
(Use when WF trims are required)
LED Trim
Catalog No. Reflector Finish LED Color Temp Flange Options
P8021 6" LED, 1100lm -21A Clear Alzak
®
/30K 3000 Kelvin WF Wide Flange
P8050 6" LED, 2000lm -22A Gold Alzak
®
/35K 3500 Kelvin
-28 White /40K 4000 Kelvin (White flange standard)
Example: P8021-21A/30KWF (Ordered separately)
Specifications:
General
• Commercial grade LED retrofit downlight
combines superior brightness control with
energy savings and low maintenance
• Suitable for commercial, retail or other
institutional applications with ambient
temperatures up to 40ºC (104ºF)
Housing
• Components made of quality die cast
aluminum or galvaneal steel
• Installation can be performed from below the
ceiling without removing the existing fixture
• Pre-wired J-box with snap on cover for easy
access
• Approved for 8 (4 in/4 out) No. 12 AWG
conductors rated for 90ºC through wiring
• Snap in connections from driver compartment
allow easy installation of LED trim assembly
without tools above or below ceiling
• Standard with ballast disconnect
• Can be upgraded to accomodate technology
improvements
LED Driver
• Efficient Class 2 driver specifically designed
for optimal performance with Fortimo DLM
module system
• 120-277VAC input, 50/60Hz
• >0.90 Power Factor
• Compliant to FCC 47CFR Part 15 Class A
• Flicker-free 0-10V Dimming to 10%
• Intergrated thermal feedback loop to ensure
driver life of 50,000 hrs
LED Light Engine/Reflector
• Uses Philips Fortimo DLM 1100 lumen or
2000 lumen LED modules
• 50,000 hrs at 70% lumen maintenance
• 80 CRI in 30K, 35K or 40K CCT
• Remote phosphor LED technology utilizes
high-brightness royal blue LEDs allowing
phosphor lens to be exposed to less heat
degredation than traditional LEDs
• Provides more controlled color consistency
fixture to fixture and over life
• Energy efficient providing 50 LPW delivered
from fixture
• High purity aluminum reflector in white or
Alzak. Painted white flange standard.
Labeling
• cCSAus certified to US and Canadian
standards
• Non-IC rated.
• Suitable for wet locations
• 5 year warranty
Progress Lighting
701 Millennium Blvd.
Greenville, South Carolina
29607
www.progresslighting.com
Rev. 4/11
NOTES: UNLESS OTHERWISE SPECIFIED
1. DEBURR AND BREAK SHARP CORNERS.
RLF8
13 3/4
16
RLF8
9 7/8
11 3/4
6 1/4
7 1/2
6 3/8
RLF6
RLF8
8 1/4
5 3/4RLF6 =
RLF8 = 7 3/4
7RLF6 =
RLF8 = 9
8 7/8
RLF6
10 3/4
12 3/4
RLF6
15
2 1/2
3 3/4
*
P1
ASSY-HSG RLF6LED
PV:1
4321
AAA
B
4321
A
B
B
NOTES: UNLESS OTHERWISE SPECIFIED
1. DEBURR AND BREAK SHARP CORNERS.
RLF8
13 3/4
16
RLF8
9 7/8
11 3/4
6 1/4
7 1/2
6 3/8
RLF6
RLF8
8 1/4
5 3/4RLF6 =
RLF8 = 7 3/4
7RLF6 =
RLF8 = 9
8 7/8
RLF6
10 3/4
12 3/4
RLF6
15
2 1/2
3 3/4
*
P1
ASSY-HSG RLF6LED
PV:1
4321
AAA
B
4321
A
B
B
12-3/4" -
15"
8-7/8" -
10-3/4"
6-3/4"
(P8021)
7-3/4”
(P8050)
7"
5-3/4"
2-1/2" -
3-3/4"
6-1/4" -
7-1/2"
Ceiling Cutout: see guide
Maximum Ceiling Thickness: 1-1/2"
Housing Compatibility Guide
Ordering Guidelines 6 inch
MIN MAX
Requires SD Housing Option 5-15/16 6-1/8
All Standard Housings 6-1/8 6-1/2
Requires P8100-01 Ring
Accessory and WF trims
6-1/2 6-7/8
Dimensions shown are for the
diameter of the frame flange at
it's narrowest point.
Notes:
To order proper housing:
1. Measure existing plaster frame aperture
2. Use Compatibility Guide for selecting hsg