Warranty

PROGRESS LIGHTING LIMITED WARRANTY
Limited Warranty (“Warranty”): Subject to the exclusions set forth below, Progress Lighting, Inc. (“Progress”) warrants that (i) all
Progress manufactured products (“Products”) will be free from defects in material and workmanship which cause the Products to fail to
operate in accordance with the specifications set forth in the documentation published or provided with the Products (the
“Specifications”) for a period of one (1) year from the date of shipment (“Non-LED Warranty Period”) and (ii) all Progress light
emitting diode (“LED”) Products, will be free from defects in material and workmanship which cause the Products to fail to operate in
accordance with the Specifications for a period of five (5) years from the date of shipment (“LED Warranty Period”). For purposes of
this Warranty, references to “Warranty Period” shall refer to either the Non-LED Warranty Period or the LED Warranty Period,
depending on the type of Product purchased by the End User. Progress warrants that any standard finish on a Product (other than
Homestyle branded Products) will be free from cracking, peeling, excessive fading, and corrosion defects during the applicable Warranty
Period. Extended warranties for Progress fan motors and Energy Star® Products may apply; please refer to Progress Product manuals for
more information. For LED Products, the LED arrays in the Products will be considered defective in material or workmanship only if a
total of 15% or more of the individual LEDs in the Products fail to illuminate.
Exclusions: This Warranty applies only when the Products have been properly handled, stored, wired, transported, installed, operated and
maintained in accordance with the applicable Specifications, including, without limitation, installation in applications in which ambient
temperatures are within the range of specified operating temperatures and operation within the electrical values shown on the
Specifications. Progress shall have no responsibility under this Warranty for any failure of the Products that results from external causes
including without limitation: acts of nature; physical damage; exposure to adverse or hazardous chemicals or other substances; use of
reactive cleaning agents and/or harsh chemicals to clean the Products; environmental conditions; vandalism; fire; power failure, improper
power supply, power surges or dips, and/or excessive switching; fatigue failure or similar phenomena resulting from induced vibrations,
harmonic oscillation or resonance associated with movement of air currents around the Product; animal or insect activity; fault or
negligence of the purchaser of the Products, any end user of the Products and/or any third parties not engaged by Progress, improper or
unauthorized use, installation, handling, storage, alteration, maintenance or service, including failure to abide by any product
classifications or certifications, or failure to comply with any applicable standards, codes, recommendations, product specification sheets,
use of Products with products, processes or materials supplied by the purchaser of the Products, any end user or third parties, or any other
occurrences beyond Progress's reasonable control. In addition, Progress shall have no responsibility under this Warranty for any
substantial deterioration in the Product finish that is caused by failure to clean, inspect or maintain the finish of the Products. During the
Warranty Period some staining, chalking or fading may occur. This is normal aging of the finish and is not a manufacturing defect;
therefore it is not covered by this Warranty. Neither polycarbonate nor acrylic material used in the Products is warranted against
yellowing, as yellowing may naturally occur over time due to normal aging. If the Products are used on existing foundations, anchorages
or structures, the purchaser of the Products and/or any end user is solely responsible for the structural integrity of such existing
foundations, anchorages or structures and all consequences arising from their use.
Adequate records (as determined by Progress in its sole discretion) of operating history, maintenance, and/or testing must be kept by the
end user and provided to Progress upon request to substantiate that the Products have failed to comply with the terms of this Warranty.
The Products are not warranted against costs that may be incurred in connection with changes or modifications to the Products required to
accommodate site conditions and/or faulty building construction or design. In addition, the Products are not warranted against cost
resulting from installation of third party components, failures of third party supplied components, or failures of Progress supplied
Products caused by third party supplied components. This Warranty is not applicable to any product(s) which are not installed and
operated in accordance with the current edition of The National Electric Code (NEC), the Standards for Safety of Underwriters’
Laboratory, Inc. (UL), or the standards for the American National Standards Institute (ANSI), and with Progress instructions and
guidelines for the Product. THIS WARRANTY IS VOID WITH RESPECT TO ANY PRODUCT IF THE PRODUCT IS NOT USED
FOR THE PURPOSE FOR WHICH IT WAS DESIGNED OR IF ANY REPAIRS OR ALTERATIONS ARE MADE BY ANY
PERSON NOT AUTHORIZED BY PROGRESS IN WRITING.
Except as otherwise set forth herein, Progress does not warrant ballasts, battery packs, lamps, photocells, occupancy sensors, low voltage
indicators, fuses, surge suppressors, surge protection devices, high intensity discharge (“HID”) components and other third party devices
that are not manufactured by Progress, which are covered by the applicable third party manufacturer warranty (if any). Such third party
manufacturer shall be solely responsible for the costs related to any claims associated with any such devices. Warping of wooden or
plastic blades is not covered by this Warranty. Metal finishes on Homestyle brand outdoor Products are not covered by this Warranty.
Remedy: If the Product(s) fail to comply with the terms of this Warranty and the end user (and the purchaser of the Product(s) if different
from the end user) has fully complied with all of the obligations under this Warranty and the Terms and Conditions of Sale for Progress
(which are available at www.hubbelllighting.com/terms_and_conditions) including, without limitation, payment in full in respect of the