+PROGRESS LIGHTING” P550093-031 P550093-135 1-LT OUTDOOR PENDANT PACKAGE CONTENTS PART| DESCRIPTION QUANTITY A [Fixture Glass shade Round nut Canopy 1 { Lust 77 p HARDWARE CONTENTS (not actual size) Screw | Wire nut| Round mounting plate | Hex nut | Knurled ball nut | Chain | Chain loop |12" Pipe | 6” Pipe | Nipple (slinky (1/8IP) | (1/8IP) | (1/8IP) | (1/8IP) Qy2 | Quirky Qty:1 Qty:2 Qty:2 Qty:1 Qty:1 Qy4 | Qiy:1 | Qy4 o 93128507 Page:1 Missing parts? Please contact Customer Service at 1-800-447-0573, am-8
AN Safety Information Please read and understand this entire manual before attempting to assemble, operate or install the product. CAUTION: Read instructions carefully and tum electricity off at main circuit breaker panel before beginning installation. CAUTION: Risk of fire. Min. 90°C supply conductors. Consult a qualified electrician to ensure correct branch circuit conductor. WARNING: If any Special Control Devices are used with this fixture, follow instructions carefully to assure full compliance with N.
Assembly Instructions 3 3. Pass the wires through the one pipe pipes {HH) and chain loop (GG) tc achieve overall desired length. Next attach pipes onto fixture (A) to secure tightly. Weave electric cord and ground wire through chain (FF) and canopy (D). Open two links of chain and attach both ends to chain loops (GG). Close the chain links. NOTE: During this step, you may choose to shorten the chain and electrical/ground wires.
Assembly Instructions 6 6. Screw lamp (not included) into the fixture socket. Use 60-watt MAX medium base lamp, HSBC or SLED. Attach glass shade (B) to fixture (A) and use round nut (C) to secure tightly. ® WARRANTY AND EXCLUSIVE REMEDY: Progress products, when properly Installed and under normal conditions of use, are warranted to aur customers early ta be free from defects In materiel and workmanship at time of shipment.
